Introduction
Typical installations include sewage treatment equipment, sewage discharge in basements and garages, restaurants, septic tanks and biogas-pit sludge discharge.
The CENTFOS SWQ-Y impeller has double spiral blades without a front cover, which work together with a cutting disc to cut up sundries and discharge them, avoiding blockage of the pump and pipeline.
Key Features
- Semi-open impeller with double spiral blades
- Cutting disc working with the impeller
- Diversion guide groove against inlet entanglement
- Hard, wear-resistant cutting edges
- Matched impeller and pump-body flow channels
- Mechanical seals on the pump side and the motor side
Technical Specifications
Parameter
Value
Maximum rated flow
650 m³/h
Maximum rated head
50 m
Speeds
1,450 / 2,900 r/min
Outlet diameter
DN50–DN300
Standard cable length
5 m
Rotation
Clockwise, viewed from the motor end to the pump end
Design Characteristics
Cutting System- Impeller with double spiral blades and no front cover, working with the cutting disc so that the parameters are not reduced
- Semi-open impeller with double blades twisted into a spiral in the inlet space, cutting up sundries and expelling them
- Cutting edges of the impeller and pump cover with sufficient hardness and wear resistance to stay sharp over a long period
Anti-Entanglement Design- Diversion guide groove on the cutting disc helps prevent inlet entanglement
- Diversion groove between the rotating and fixed flow-through parts scrapes off thin, tough debris, avoiding increased pump power or blocking
- Impeller and pump-body flow channels precisely matched so that shredded debris passes through smoothly
Sealing System- Mechanical seals on both the pump side and the motor side for double submersible shaft seal protection of the motor
- Oil in the oil chamber lubricates and cools the mechanical seals
- Structure at the pump-side seal area shreds and drives away sundries, preventing accumulation in the seal cavity
Operating Conditions
Parameter
Condition
Medium density
≤ 1,050 kg/m³
Motor protection class
IP68
Insulation class
F
Flange pressure grade
0.6 MPa (DN200 and below); 1.0 MPa (DN250 and above)
Motor exposed above liquid
Not more than half of the motor height
Operating range
Within the rated head, so the motor is not overloaded
Applications
CENTFOS SWQ-Y pumps are suitable for sewage containing tough fibrous material, including:
- Sewage treatment equipment
- Basement and garage sewage discharge
- Restaurants
- Septic tanks
- Biogas-pit sludge discharge
- Sewage containing long-fibre cloth, woven bags and rubber
Advantages
- Helps prevent blockage of the pump and pipeline by sundries
- Cutting edges stay sharp over a long period
- Avoids increased pump power or blocking from tough debris
- Smooth passage of shredded debris
- Double shaft-seal protection for the motor