Submersible Pump

Submersible Pump

SH (SHC & SHS) SHM
SH Series Submersible Pump.

There are 3 kinds of submersible pumps are included in this type. SH series is composed of 02 Types (SHC a Non Clogging Impeller and SHS a stirring Impeller). They are normal sewage pump, automatic mix sewage pump and sewage pump with the cutter. They are designed to pumping all sorts of waste water and sewage in municipal engineering, industry, hospital, hotel and commercial building. It’s capable of transferring impurity with long fiber and solids.

Our submersible pump is with below features:

1.Unique hydraulic design provides excellent hydraulic abilities, allowing the pump to run with high efficiency and safety in higher capacities application.
2.Special single or double channel impeller with no-clogging design increase the capacity of passing sewage liquids with solid and long fiber.
3.The pump has unique seal designed by combining double mechanical seal with a hydrodynamic seal, providing the reliability for a long operation life of 8000 hours.

4.The underwater pump has a water circulation cooling system, allowing the pump to run safely above water level or for dry installation.
5.The underwater water pump is equipped with fully automatic alarm protection system and liquid level control system. The systems can check out the leakage of water, oil, and electricity, overheating, over loading, the lake of phase electricity, low voltage and higher temperature of bearing etc, so safety and reliability of the pump have been guaranteed.
6.The auto-coupled installation system provides an easy way of being installed and maintained, usually, no pumping station is needed and saving the construction investment. Two styles of auto-coupled installation system and movable installation system can fullfil different application.

 

SH are single stage, single suction submersible sewage water pumps with the overhung non-clogging impeller. Industrial submersible pump can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with pump connector unit and the connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint.

Pump casing:
The radially split casing is provided with delivery nozzle cast integrally with it. Suction is axial and the delivery nozzle is central and horizontal. Specially designed” cutter fan ” to agitate liquids easy sediment. Wide volute passage ensures non-clogging operation of the pump.

Impeller:
Impellers are of the non-clog type which allows smooth passage of solids.
Impellers are with double vanes in enclosed,  channel type
Cutter Fan is option for

SHC Type with Non-Clogging Impeller
SHS Type with Automatic-Stirring Cutter Fan

Shaft:
The high tensile Stainless-steel shaft accurately machined and the ground is supported by two ball bearings in the motor above the impeller. The shaft is designed to transmit the power without undue vibrations and deflections. The shaft is common for pump and motor of mono-block design.

Mechanical Seal.
Two mechanical seals in the tandem arrangement are provided to ensure no ingress of water or sewage in the motor.

Optional:
Pumps can be supplied with “Cutter Fan” arrangement at suction to agitate the liquid

Bearing:
Bearings are oil lubricated and sealed for life, hence maintenance free.

The direction of Rotation:
Clockwise when viewed from the motor top.

Drive.
The motor is dry type submersible and cooled by the liquid being handled.
Motors are air tested for leak free operation.
Degree of protection for motor is IP68 as per IS:2147
Class of insulation: F
Voltage : 380V    10%
Frequency: 50 Hz.  5%
Type of starting: As per requirement

Cable:
A specially designed cable, 1.1 kV grade having annealed tinned copper conductor, insulated with Electron Beam Irradiated cross-linked elastomeric compound (compatible for continuous operation at 1200 C) cores laid up with a proof cotton binder tape and sheathed overall with Electron Beam Irradiated Cross-linked HD HOFR elastomeric compound and generally conforming to IS 9968 Part l. The cable with this unique combination of insulating and sheathing material offers best resistance to acidic or alkaline sewage medium and to the effluent gases coming out of the sump. The cable is more flexible than PVC cable making coiling and handling easier and light in weight compared to PVC cable of the same size.


Industrial Submersible Pump Operation Data:

Capacity: up to 3056L/s (11000m3h), or as per any request.
Head: up to 60m(196ft), or as per any request.
Working temperature: up to 40°C
Nozzle: up to 600mm or special design. the standard can be DIN, ANSI or other standards.


Submersible Sewage Pump Material Available:

Pump Part

Material Combination

Cast Iron

Ductile Iron

SS 304

SS 316L

Casing

Cast Iron

Ductile Iron

SS304

SS316L

impeller

Cast Iron

Ductile Iron

SS304

SS316L

Shaft

SS 420

SS304

Seal housing

Cast Iron

Ductile Iron

SS304

SS316L

 

Description:SH are single stage, single suction pumps with overhung non clogging impeller. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is suppl…

DESCRIPTION:SHM series are Non-Clog Electric Submersible Pumps for Sludge, Sewage, Trash & Industrial Waste. The SHM pumps are equipped with Vortex impellers, undoubtedly the best non-clog impellers…

Brochures

View our 2020 Medical prospectus of brochure for an easy to read guide on all of the services offer.

Get in touch for any kind of help and informations

We’re glad to discuss your organisation’s situation. So please contact us via the details below, or enter your request.

Our head office address:

Via dell'Annunciata, 23/4 20121 Milan. ITALY

Call for help:

(+39) 02 3663 8610

Mail us for information

info@centfos.com

    X