Axial Split Casing Centrifugal Pump

Axial Split Casing Centrifugal Pump

CMZ
CMZV

CMZ/CMZV pump is single stage, axial split case, double suction, between bearing centrifugal pump. It’s suitable for pumping clean water or slightly contaminated water or liquids which are physically and chemically similar to water, where large quantity and certain head are required.

The casing is axially split into two parts. The upper part (lighter) and lower part of the casing differ in weight. The inline suction and discharge nozzles are cast in the lower half casing. This design makes it easy to remove the upper casing and rotary components without disturbing the motor and the pipework.

The closed double suction impeller can lower the NPSHr due to each impeller eye only handles half of the total pump flow rate. And it also can increase the efficiency through back-to-back / double suction impeller design, as the power is not lost to balance the hydraulic thrust.

The bearings are located on both sides of the rotor, which reduces the deflection of the shaft and make the pump runs more stable.

Split case centrifugal pump generating high heads have dual volutes to reduce radial forces, ensuring minimal shaft deflection and low bearing loads.

And axial split casing pump is with a wide installation versatility, the split case centrifugal pump can be produced in horizontal or vertical mounting, clockwise or anti-clockwise rotation, side suction or bottom section.

As a professional centrifugal pump manufacturer in Italy and devoted to providing high-quality split case pump for our customers with excellent after-sales service.

 

Description:CMZ series are horizontal, single stage, axially split case, double suction, between bearing, centrifugal pumps. It’s suitable for pumping clean water or slightly contaminated water or li…

Description:CMZV series are vertical, single stage, axially split volute casing, double suction, centrifugal pumps. It’s suitable for pumping clean water or slightly contaminated water or liquids whi…

Brochures

View our 2020 Medical prospectus of brochure for an easy to read guide on all of the services offer.

Get in touch for any kind of help and informations

We’re glad to discuss your organisation’s situation. So please contact us via the details below, or enter your request.

Our head office address:

Via dell'Annunciata, 23/4 20121 Milan. ITALY

Call for help:

(+39) 02 3663 8610

Mail us for information

info@centfos.com

    X